Home > Windows 7 > Classpnp.sys Bsod 7b

Classpnp.sys Bsod 7b

Contents

You are great.Leave comments, ask questions, or suggest improvementsFeel free to leave comments or suggest improvements. Aligning All Equations in a Document at Equality Sign What could make a star green? Even went so far as to copy over the whole drivers folder and it still did nothing.Then thinking it's a BIOS problem, flashed the newest version of that. My problem is solved. navigate here

Since there was no driver loaded, Windows couldn't boot off that drive and I'd get the BSoD. I can boot into another copy of windows thus I have access to a working set of files and drivers on this specific hardware setup. Now you can use this guide and enable AHCI again: AHCI : Enable in Windows 7 / Vista If you need anything else, don't hesitate to post a new thread. Now the C:\ partition appears to be the Windows 7 recovery partition, which was previously hidden. https://social.technet.microsoft.com/Forums/windows/en-US/19c703a4-f52a-4b90-8a8c-fd80cbaf9c7a/windows-7-no-boot-stop-0x0000007b-and-classpnpsys-problem?forum=w7itprogeneral

Classpnp.sys Fix Windows 7

There is no minidump either. Except in my BIOS there was no IDE option, just AHCI and Compatability. Win7 booted andre installedall the devices upon login..THANK YOU!!!!! Only the driver of the boot device is loaded special early in the boot process; all other disk controllers are loaded the normal way.

The Properties key under both versions of the IDE\CDROMQEMU_QEMU_DVD-ROM… key had about a dozen strings listing certain information about the device (such as its full name, "QEMU QEMU DVD-ROM ATA Device", Critical_Service_Failed message solved freeze, crash without BSOD, flickering screen, slow boot BSOD on boot. KHALID AIFAN replied on March 17, 2013: » Disabled peripherals in BIOS or manually removed RAM and other devices, reset the CMOS battery, etc...Eventually what worked: I switched my hard drive Classpnp.sys Windows 10 Best answer Atin90Oct 2, 2011, 4:25 AM Had very similar problem this morning.

Then I unpluged the rgb cable to the monitor - it is PNP, right? All Rights Reserved Tom's Hardware Guide ™ Ad choices Jump to content Sign In Create Account Search Advanced Search section: This topic Forums Members Help Files Calendar View New So I was thinking that SafeDisc probably screwed up a single registry entry somewhere that is required from very early on in the Windows boot process, just because it could (because click here now The repair failed and mentioned "Bad Driver" as the cause.

After that I've been having a lot of issues... Classpnp.sys Bsod Windows 2008 R2 I was able to image everything, but I get the same BSOD, so both paths have ended up in the same place. All we need to do is satisfy Win7 regedit requirements.The fix:Mount the Win7 DVD in VMware Player (or Workstation) and boot to it.At the first screen (Language Selection), hit Shift-F10 for Now I'll keep my fingers crossed.

Classpnp.sys Download Windows 7 64 Bit

So yeah, easy solution and none of the things I tried were even necessary. http://www.bleepingcomputer.com/forums/t/537712/windows-7-hangs-when-loading-driver-classpnpsys/ This is a legitimate scenario, and fortunately, I tested before a failure occurred.It should absolutely be conceivable that customers might restore from a non-SATA machine to a SATA containing machine. Classpnp.sys Fix Windows 7 I have been reading other threads to try and fix this and was not looking foward to rebuilding PC but I got lucky. Windows 7 And The Classpnp.sys Safe Mode Loop Also reseated the Sata cable for the SSD but that did nothing.

Anti-static mat connected to earth directly or 1E6 ohm resistor? check over here I was also having 0x7B problem. Except that didn't fix the BSOD either. my wife had login errors to her email account, so she rebooted. Classpnp.sys Boot Loop

MousemonkeyOct 3, 2011, 4:26 AM This topic has been closed by Mousemonkey kyrancOct 9, 2011, 8:10 AM Best answer selected by kyranc. I realized (since it told me I would need to reboot before I could see the changes) that I most likely saw "disk drive" and disabled my hard drive instead by What the documented method does is tell windows to start the needed driver for the controller that the boot disk is attached to EARLY (special) in the boot process. http://afede.org/windows-7/classpnp-sys-bsod-fix.html Re: Windows 7 Guest: STOP 0x0000007B deafgrischa Jul 5, 2012 2:54 AM (in response to batequeixo) Thank you batequeixo,It was exactly my problem and your answer was perfect for me, it

Edited by scotty_ncc1701, 14 June 2014 - 09:23 AM. Classpnp.sys Bsod Windows 10 Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the Related Resources solved BSOD after starting windows splash screen or CLASSPNP.sys BSOD Problems: classpnp.sys, ntkrnlmp.exe, aswsnx.sys, ecache.sys, ntoskrnl.exe solved Switch from ssd to hdd in HP elitebook 8560p leads to boot

Restoring a back-up from a non-SATA machine to a SATA machine is not a common scenario because there is a high probability that the overall hardware would have changed significantly so

General Discussion Tweaking boot time (classpnp.sys?)I'm looking for ways to reduce my reboot time (102 seconds according to this script). I got: "Windows Resource Protection did not find any integrity violations." I repeated the "enter the repair tool and let it fail and restart" procedure so that F8 would give me I tried to run the 32-bit version of the device manager in OllyDbg (which does not offer debugging support for 64-bit processes yet, although it's getting close to completion), except that Unmountable Boot Volume Windows 7 A bit more googling suggests both these system files causing crashing may be due to a virus or trojan.

You'll get the obligatory white bar at the bottom of the screen saying 'Loading'. You never know when one will leave you. I found one fix that seems to work for most, which entails copying the CLASSPNP.SYS file from another system and copying it to the crippled machine (while renaming the original CLASSPNP.SYS.OLD weblink The key that changed in ControlSet001 was this: < "ConfigFlags"=dword:00000000, > "ConfigFlags"=dword:00000001. 0 for enabled, 1 for disabled.

I cannot boot up from 7 pre DVD. Back to top #6 cbblake1 cbblake1 Topic Starter Members 34 posts OFFLINE Local time:09:23 PM Posted 14 June 2014 - 06:28 PM Thanks, guys, for the help! And it was NOT under Properties; it was under  5&3a2a5854&0&1.0.0 itself. You never know when one will leave you.

Sunday, December 22, 2013 10:55 PM Reply | Quote 0 Sign in to vote This worked for me. This Classpnp.sys is the driver for SCSI devices, due to the Windows cannot be booted, this problem may occur in scenarios as following: · The registry is corrupted. · A The reason is that Windows 7 and Vista disable any drivers not currently in use to minimise start-up time so you will need to enable the new driver type before changing All of this was caused by disabling my hard drive in the device manager.

Notice: This applies only to Windows 7 and Windows 8, earlier versions do not have this. 1. Now I'm logged in, things are very wonky, but it's better than before. The details of the BSOD were this: "Check your hard drive to make sure it is properly configured and terminated. You are a god.

After changing it back to 0, the BSOD was resolved. That didn't work, so in recovery console I went to command prompt and renamed all files AVG*.sys files to AVG*.sys.old in C:\Windows\System32\Drivers as recommended on another forum. It goes to the Windows Recovery, but it cannot locate the Windows OS to repair/recover.